レビュー コネクタ／パッチベイ

• 12/02/29

  Planet Waves Gold Series - Gra Cable - nickname009
  翻訳済みこの翻訳を修正する

  

  I used to only buy planet waves cables and these were the only ones I used to buy. They have upgraded them since and I believe they are better now. Previously the jacks were compressable so that it'd be a tight fit in the input jacks of amps and guitars which is nice so it won't fall out lose however, they were so tight and after time they would...

• 11/12/12

  Planet Waves Jack/jack - "high quality cables - ericthegreat
  翻訳済みこの翻訳を修正する

  

  I've been using Planet Waves Jack/Jack instrument cables for about seven or eight years. I have a number of them and they are a mainstay in my guitar set up. I have found these cables to be beyond reliable. I have never had one break, and the gold tips ensure a good sound and solid connection. While they are a bit expensive for a cable, it is w...

• 11/11/24

  ProCo Sound MAX20 - moosers
  翻訳済みこの翻訳を修正する

  

  The ProCo Sound MAX20 is a -20 db pad that you insert in between your mic cable and microphone to give you some more head room and -20 of attenuation with hot mics and on loud signals. There isn't really anything that you need to know other than that as it will simply give you -20 db of attenuation. There is also both a -10 db and -30 db versi...

• 11/10/26

  Horizon IPad-10 - moosers
  翻訳済みこの翻訳を修正する

  

  Before there was Apple's iPad, Horizon released a much lesser known device called the Horizon IPad-10. The comparisons will stop there, as of course this serves a completely different function, as it's a -10 db pad for use in the studio. In theory you could also use it for live shows, but I've only used it for recording studio applications. O...

• 11/10/08

  Hosa CRA803 Octo RCA / RCA 3m - "Good, standard snake cables - themaddog
  翻訳済みこの翻訳を修正する

  

  The Hosa CRA803 is an audio snake with 8 individual cable connections in a 3 meter long length. The connections are available as RCA-RCA, or 1/4"-RCA. In either case, the cables are unbalanced, which means the shorter the cable length that's being run, the better. These snakes are a good choice for connecting mixers to Tascam and Fostex reel ...

• 11/09/30

  Whirlwind DCT-9 Tester - moosers
  翻訳済みこの翻訳を修正する

  

  The Whirlwind DCT-9 Tester is a cable test that can test all sorts of cables to see if they are in working condition or not. I don't own one of these as I don't own a large enough studio, but if I did I would be all over this. Having worked at various studios over the years, you'd be surprised (or maybe you wouldn't be) at how many cables brea...

• 11/09/30

  Little Labs STD Mercenary Instrument Cable Extender - moosers
  翻訳済みこの翻訳を修正する

  

  The Little Labs STD Instrument Cable Extender is a simple and unique device that allows you to extend your instrument cable without losing any quality. If you didn't know, using really long instrument cables can actually cause you to lose some tone, so in the studio it's especially important to be aware of this. That's where the STD comes in h...

• 11/09/02

  Tascam PB32P - moosers
  翻訳済みこの翻訳を修正する

  

  The Tascam PB32P is a simple 1/4" 32 point patch bay that can be used in any sort of studio setting. I've used the PB32P a bunch at a friend's home studio where he has it hooked up to some outboard gear. You probably know this if you're reading this review, but the main idea for a patch bay is to make easy connections between your gear so you ...

• 11/09/02

  RapcoHorizon Standard Speaker Cable - moosers
  翻訳済みこの翻訳を修正する

  

  Rapco Horizon's Standard Speaker Cable comes in all shapes and sizes. It's one of the cheapest ways you can get some speaker cable and still get something that is somewhat sturdy and should last for a bit if you treat it well. They say that these are hand soldered cables and the connections at the end are all nickel and they also come with a l...

• 11/08/28

  dbx PB48 - "Doesn't hold up over time - briank
  翻訳済みこの翻訳を修正する

  

  The DBX PB48 is a low-cost, no-frills, 48-point, 1/4" TRS jack front-and-back patch bay. Patch channels can be normalled or de-normalled depending on how you have each module oriented--to change configurations, you loosen a plastic nut, remove each module, rotate it an re-install. The plastic nuts are spaced close together whic...

• ページ： 1
• 2
• 3
• 4
• 5
• 6
• 
•